Infotainment System Display, Removing And Installing: Removing
-- Turn off the ignition and all electrical consumers and remove the ignition key.
CAUTION:
Risk of damaging the component surfaces.
- When positioning a prying tool, put commercially available adhesive tape over the component in the visible area.
-- Remove the instrument panel center trim. Refer to Instrument Panel .
-- Insert the Radio Removal Tool:T10057 into the release slots -1- on the Front Information Display Control Head -J685-.
-- Release the upper locking mechanisms -1- by pushing in direction of travel.
-- Release the lower locking mechanisms -1- by pushing in direction of travel.
-- Remove the Front Information Display Control Head -J685- -2-.
-- Release and disconnect the connectors.