Special Tools

Fig 1: Identifying Special Tools -- Bonded Rubber Bushing In Transmission Carrier, Replacing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Press Plate: VW402 
• Press Piece - Multiple Use: VW412 
• Press Piece - Bushing - 50mm Diameter: VW432 
• Base Block: VW441 
• Press Piece - Reverse Gear Syncro: 3296 
• Gearbox Carrier Mounting Assembly Tool: T10214 

Fig 2: Identifying Special Tools -- Transmission Support

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Transmission Support: VW785/1B 
• Bearing Installer - Multiple Use: 3062 
• Transmission Support: 3282 
• Engine and Gearbox Jack: VAS6931 

Special tools and workshop equipment required 

• Puller - Unit Injector: T10055  with Puller - Unit Injector - Adapter 2: T10055/2 
  Fig 3: Identifying Puller T10055

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Engine/Gearbox Jack - Gearbox Support: T10337 
  Fig 4: Engine/Gearbox Jack - Gearbox Support T10337

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Seal Installer - Hollow Shaft: T10380 
  Fig 5: Identifying Thrust Piece - T10380-

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Seal Installer - Inner Output Shaft: T10399 
  Fig 6: Identifying Assembly Tool T10399

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Seal Installer - Flange Shaft: T10449 
  Fig 7: Identifying Thrust Piece T10449

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Shop Crane: VAS6100 
• Inductive Heater: VAS6414 
  Fig 8: Identifying Inductive Heater VAS 6414

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Puller - Multiple Use: VW391 
  Fig 9: Puller - Multiple Use VW391

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Engine/Gearbox Support Shackle (2 pc.): 10-222A/12 
  Fig 10: Identifying Shackle 10 - 222 A/12

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Used Oil Collection and Extraction Unit: SMN372500 
• Seal Installer - Input Shaft: T10448 
• Seal Installer - Flange Shaft: T10450