Selector Lever Handle, Removing And Installing: Installing

Installation is performed in the reverse order while observing the following:

• The selector lever is in the "D" position.
• The push button in the handle is in the installation position -arrow- and points in the direction of travel during installation.
  Fig 1: Handle With Button In Front

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

There is the possibility that the button can be pressed into the handle. Never install the handle when the button is pressed in.

A new handle is delivered with an assembly fastener. Pull out the safety catch in the direction of -arrow- just before installing.

Fig 2: Identifying Direction To Pull Out Assembly Aid Just Prior To Installation

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the handle on the selector lever with a new ear clamp until it snaps into place. Do not tighten the ear clamp yet.

-- Push the button in the selector lever handle.

-- If the button returns to its starting position after being pressed, the ear clamp -arrow- can be fastened using the : VAG1275A  .

Fig 3: Clamp Under Boot

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Connect the connector.

-- Clip on the cover.