Motor Pump Assembly, Removing And Installing: Installing

Install in reverse order of removal. Note the following:

NOTE:

Replace the gaskets and seals.

Hose supports and hoses must be free of oil and grease before installation.

Secure all hose connections with new hose clamps. Refer to the Parts Information.

-- Bleed steering system. Refer to POWER STEERING SYSTEM, BLEEDING .

-- Check the hydraulic fluid level and fill if necessary. Refer to POWER STEERING, CHECKING FLUID LEVEL .

-- Check the steering system for leaks. Refer to STEERING SYSTEM, CHECKING FOR LEAKS .

Tightening Specification

Component	Tightening Specification
Engine pump assembly to bracket	8 Nm
Pressure line union nut to connection point	40 Nm