LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2015 >> Passat TDI SE, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (2.0L - Generic Scan Tool - Engine Code: CKRA) >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Procedures >> NOX Sensor / Module, Checking >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

NOX Sensor / Module, Checking: Notes

WARNING: This page is about a different car, the 2014 Volkswagen Passat, 2013 Volkswagen Passat, and 2012 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.

Observe all safety precautions: SAFETY PRECAUTIONS 

View clean working conditions: CLEAN WORKING CONDITIONS 

NOTE: The NOx Sensor and NOx Module are hard wired (no connectors between them) and are serviced as a unit.

Use only gold-plated terminals when servicing any component with gold-plated electrical harness connector terminals.

For wiring diagrams, component locations, and connector views, Refer to the applicable wiring diagram.

Special tools and workshop equipment required