LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2015 >> Passat TDI SE, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (2.0L - Generic Scan Tool - Engine Code: CKRA) >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Procedures >> Charge Air Pressure / Intake Air Temperature Sensor, Checking >> Final Procedures
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Final Procedures

WARNING: This page is about a different car, the 2014 Volkswagen Passat, 2013 Volkswagen Passat, and 2012 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.

-- Install the engine cover. Refer to the Repair Information.

After the repair work, the following work steps must be performed in the following sequence:

  1. Check the DTC memory. Refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY .
  2. If necessary, erase the DTC memory. Refer to DIAGNOSTIC MODE 04 - ERASE DTC MEMORY .
  3. If the DTC memory was erased, generate readiness code. Refer to READINESS CODE .
scientia non olet · About LEMON Manuals