LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2015 >> Passat TDI SE, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (2.0L - Generic Scan Tool - Engine Code: CKRA) >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Procedures >> Cylinder Combustion Chamber Pressure Sensor, Checking >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cylinder Combustion Chamber Pressure Sensor, Checking: Notes

WARNING: This page is about a different car, the 2014 Volkswagen Passat, 2013 Volkswagen Passat, and 2012 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.

Observe all safety precautions: SAFETY PRECAUTIONS 

View clean working conditions: CLEAN WORKING CONDITIONS 

Prior to repair work, perform a preliminary check to verify the condition. Refer to PRELIMINARY CHECK .

-- The Cylinder Pressure Sensor is located within the Glow Plug and is not serviceable separately.

NOTE:

The Glow plug terminal / connector is not repairable. The harness must be replaced if damaged.

For wiring diagrams, component locations, and connector views, refer to the applicable wiring diagram.

Special tools and workshop equipment required 

scientia non olet · About LEMON Manuals