Removable Trailer Hitch, Checking And Cleaning If Necessary: Procedure

-- Check the surfaces -arrows- on the ball head mount for corrosion.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If there is corrosion on the surfaces, scrape it off with a three sided scraper then clean the surface with silicone remover.

-- Apply a light coat of G 000 650 or G 000 150 paste to the cleaned surfaces.

-- Check the contact surfaces -arrows- on the ball head for corrosion.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If there is corrosion on the surfaces, scrape it off with a three sided scraper then clean the surface with silicone remover.

-- Apply a light coat of G 000 650 or G 000 150 paste to the cleaned surfaces.

-- Make sure the ball head fits correctly inside the mount. Refer to Checking .

-- Install the cap -1- into the ball head mount -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

If the cap is missing or damaged, a new one must be installed to prevent corrosion around the ball head mount.

-- Install the cover -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.