Headlamp Washer System, Checking Washer Nozzle Adjustment
CAUTION:
The washer nozzles can be checked for functionality, but they cannot be adjusted.
Spray Jet Adjustment, Checking
-- Turn on the low beam.
-- Operate the windshield washer.
Headlamps are washed, if windshield wiper lever is held at least 1.5 seconds in "wiping position"
The spray should hit the center of the headlamps.
If the spray pattern differs from the specification, perform a repair.
NOTE:
The test diagram is also for vehicles with Halogen headlamps.