Selector Lever Cable, Checking And Adjusting: Adjusting:

-- Move the selector lever into "P".

• The adjustment screw -2- must be >>loosened<<.

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Move the selector lever -3- on the transmission into "P" (push the gearshift lever to the rear).

-- From >>underneath the vehicle<<, rotate both front wheels in the same direction and at the same time until the parking lock engages audibly.

• The parking lock is engaged when it is not possible to rotate both front wheels in the same direction at the same time.

-- Tap the handle on the selector lever back and forth gently but do not move it out of "P" under any circumstances.

This places the selector lever cable core in its optimal position.

-- Tighten the bolt -2- to the tightening specification.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

This ends the adjustment.