ATF, Filling
-- With the engine running install the Oil Filler - Adapter 2 :VAS6262/2 hand-tight in the check hole.
-- Shake before opening.
The ATF filler tool must be clean and the ATF must not be mixed with any other ATF.
-- Attach the Oil Filler :VAS6262A to the oil bottle. Be sure to read the instructions. Refer to ATF LEVEL, CHECKING .
-- Fill 1 liter of ATF.
-- Remove the Adapter for Oil Filling :VAS6262A at the quick-release coupling and check it.
If ATF Flows Out of Adapter Hole:
ATF does not need to be topped off.
-- Allow ATF to drain until it drips.
-- Install the ATF inspection plug with a new seal. The ATF level test is now completed.
If No Oil Drips Out of the Hole:
-- Add another liter. Refer to ATF, Filling
Too little or too much ATF will impair the transmission.