Selector Lever Cable, Checking And Adjusting: Notes
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Lock washer - Cable
- Bolts - Shifter
Selector lever cable must be adjusted if:
- The selector lever cable was removed from the transmission.
- The engine and transmission were removed and installed.
- The selector lever cable and the selector mechanism were removed and installed.
- Engine/transmission positions changes, for example, were installed free of tension.
-- Move the selector lever into "P".
-- Unclip and remove the damper cover -1- upward from the retainers -arrows-.