Overview - Shift Forks

NOTE:

The shift fork group (-item 1) does not need to be disassembled to remove and install shift segments, lock washers and angular contact ball bearings.

Fig 1: Exploded View Of Shift Forks

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Shift Fork Group with Gearshift Rails
3rd/4th Gear Shift Segment
- Identification. Refer to Figure.
- Selector segment must still rotate easily after assembly
Angular Contact Ball Bearing
- Removing. Refer to Figure.
- Installing the bearing inner race into the outer race. Refer to Figure
- Installing. Refer to Figure.
- Quantity: 4
Lock Washer
- Replace after removing
- Removing. Refer to 3.
- Installing. Refer to 3.
1st/2nd Gear Shift Segment
- Identification. Refer to Figure.
- The shift segment must still rotate easily after the lock washer is installed.
- Shift fork with selector segment
5th Gear Shift Fork with Selector Segments
- Selector segments are connected to shift fork and cannot be separated.
- Identification. Refer to Figure.
Mounting Pin
- For 5th gear shift fork