Engine, Securing To Engine And Transmission Holder: Procedure

WARNING: This page is about a different variant/trim than selected.

The transmission is separated from the engine. Refer to ENGINE AND TRANSMISSION, SEPARATING .

-- Release the retainer in direction of -arrow- and remove the engine cover mount -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip the mount -1- for the right engine cover -2- from the hole.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Engage the :2024A onto the engine and onto the :VAS6100 .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

To be aligned to the center of gravity of the engine assembly, the rail with holes for the lifting hook must be inserted as shown in the illustration.

-- Lower the engine from the :VAS6931 using the :VAS6100 .

-- Secure the transmission side of the engine to the :VAS6095A as illustrated.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.