Securing On Engine And Transmission Holder: Procedure
WARNING: This page is about a different variant/trim than selected.
- If necessary drain the AFT. Refer to ATF, DRAINING AND FILLING .
-- Secure the transmission on the Holding Fixture :VW540 -arrows-.
-- Install the transmission using the Shop Crane :VAS6100 in the Holding Fixture :VW313 or the Engine And Transmission Holder :VAS6095 .
WARNING:
The center of gravity of the transmission is outside the center of rotation at holding fixture. To prevent back swing, a second technician must hold transmission housing when rotating the transmission on the Holding Fixture :VW313 .