USB Connection BASEPLATE -R193-

WARNING: This page is about a different car, the 2014 Volkswagen Jetta, 2013 Volkswagen Jetta, 2012 Volkswagen Jetta, 2011 Volkswagen Jetta, and 2010 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Radio Removal Tool 3316

The USB connection baseplate is located inside the center armrest.

Removing

CAUTION:

Turn off the ignition and all electrical consumers.
Remove the key.

-- Open the center armrest.

-- Remove any data storage devices and their wire connections.

-- Insert the 3316 into the slots -arrows- on the USB connection baseplate.

Fig 1: Identifying Storage Compartment With USB Connection Removal Slots

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The USB connection baseplate is illustrated as removed for purposes of clarity.

-- Press the 3316 apart in -direction of arrow-. Remove the USB connection baseplate from the center armrest using 3316.

Fig 2: Identifying Locking Mechanism

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector from the USB connection baseplate.

-- Press the spring on the USB connection baseplate in -direction of arrow- and, at the same time, remove the 3316 in -direction of arrow A-.

Fig 3: Identifying Direction To Push Spring On Removed Insert And Pull Extracting Tool Out In

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installing

-- Insert the USB connection baseplate into the center armrest. The USB connection must in the back.

Install in reverse order of removal.