In Glove Compartment
WARNING: This page is about a different car, the 2014 Volkswagen Jetta, 2013 Volkswagen Jetta, 2012 Volkswagen Jetta, 2011 Volkswagen Jetta, and 2010 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Removal
CAUTION:
- Turn off the ignition and all electrical consumers.
- Remove the key.
-- Disconnect any devices connected to the multimedia system control module.
-- Remove the glove compartment. Refer to Removal and Installation .
-- Remove the screw -5- from the connector -2-.
Fig 1: Identifying Connector -2- From Glove Compartment -1-, Multimedia System Control Module -3- And Screws -4-/-5-
-- Remove the screw -4- from the inside.
-- Remove the multimedia system control module -3- with the connector -2- from the glove compartment -1-.
-- Disconnect the connector -2- from the multimedia system control module -3-.
Installation
Install in reverse order of removal.
Torque specifications: 1.5 Nm