Guidelines For Clean Working Conditions
WARNING: This page is about a different car, the 2014 Volkswagen Jetta and 2013 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Always clean connection places and surrounding areas with engine or brake cleaner before loosening and dry cleaned places.
- Clean the transmission and transmission components using for example Cleaning Solution -D 009 401 04-.
- Use lint-free towels.
- Seal all open lines and connections immediately with new plugs from the Repair Kit 5C0 998 152..
- Place removed parts on a clean surface and cover them. Use foil and paper. Use a lint-free cloth.
- Carefully cover or plug unpacked components if repairs cannot be performed immediately.
- Only install clean components: Remove the replacement parts from their packaging just prior to installing them.
- Protect the disconnected connectors from dirt and moisture and only connect when they are dry.
- Make sure no dirt can get into the transmission when it is open.
- Do not run the engine when the cover is removed from the transmission or when there is no transmission fluid in the transmission. Do not tow the vehicle.
- Cover all opened components carefully if it necessary to perform a repair.