Service Interval Display, RECODING

-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .

-- Switch on the ignition.

-- Touch: "Guided Functions" on the touch screen.

-- Select the following one after the other:

• Brand
• Type
• Model year
• Engine code

-- Confirm the VIN.

-- Select the following one after the other:

• "Instrument Cluster"
• "Adapt service interval extension."

-- Adapting according to "Guided Functions".

End Adaptation

-- Select Go to  and then press End  .

-- Turn off the ignition and disconnect the diagnostic connector.

Change in the Km-Maximum Values for Oil Change Service (fixed) during the Delivery Inspection.

-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .

-- Switch on the ignition.

-- Touch: "Guided Functions" on the touch screen.

-- Select the following one after the other:

• Brand
• Type
• Model year
• Engine code

-- Confirm the VIN.

-- Select the following one after the other:

• "Instrument Cluster"
• "Identify control module"
• "Guided functions"
• "Oil change service (fixed)"

-- Follow the "Guided Functions" instructions.

-- "1" Reset Oil change service (fixed).

-- Follow the "Guided Functions" instructions.

The maximum Km values are displayed in the Vehicle Diagnostic Tester.

-- Select "no".

-- Select the country specific maximum values until the next oil change service.

-- Adapting according to "Guided Functions".

End Adaptation

-- Select Go to  and then press End  .

-- Turn off the ignition and disconnect the diagnostic connector.