Compass Magnetic Field Sensor

WARNING: This page is about a different car, the 2014 Volkswagen Jetta, 2013 Volkswagen Jetta, 2012 Volkswagen Jetta, and 2011 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

The Compass Magnetic Field Sensor -G197- is inside the rear lid.

Removing

-- Remove the rear lid trim panel, refer to Description and Operation .

-- Remove the Compass Magnetic Field Sensor -G197- -1- from the bracket -2- with a small screwdriver.

Fig 1: Identifying Compass Magnetic Field Sensor And Bracket

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disengage the connector and disconnect.

Installing

Install in reverse order of removal.

-- Calibrate the compass again.