Pendulum Support, Removing And Installing: Notes

WARNING: This page is about a different car, the 2013 Volkswagen Jetta, 2012 Volkswagen Jetta, and 2011 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Torque Wrench 1331 5-50Nm VAG1331

Removal

-- Remove the noise insulation. Refer to Removal and Installation .

-- Remove the bolt -1-.

Fig 1: Installing the Pendulum Support

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -2- and -3-.

-- Remove the pendulum support.

Installation

Install in reverse order of removal. When doing this note the following.

-- Install the noise insulation. Refer to Removal and Installation .