Battery Recharging Or Battery Jump Start Terminal, Vehicles With Start/Stop System
Risk of injury. Observe all warning messages and safety precautions. Refer to WARNINGS AND SAFETY PRECAUTIONS .
Information regarding recharging the battery or using the battery jump start terminal on vehicles with Start/Stop.
Connect the positive terminal first and then the body ground using a charge cable. This ensures that the Battery Monitoring Control Module -J367- is not bridged. Charging the battery directly on the negative terminal bridges the Battery Monitoring Control Module -J367- and prevents the Battery Monitoring Control Module -J367- from recording the battery data during the charging process. The values stored in the Data Bus On Board Diagnostic Interface -J533- regarding the battery charge no longer match the values for the charged battery.