Battery Transport Mode, Deactivating: Procedure
:
NOTE:
If the displays indicated in the procedure are not shown on the display. Refer to the Vehicle Diagnostic Tester Operating Instructions.
| ODIS Service |
|---|
| -- Connect the Vehicle Diagnostic Tester. Refer to Vehicle Diagnostic Tester . |
| -- Switch the ignition on. |
| -- Perform the vehicle identification. |
| -- Enter the work order data or select "no work order". |
| -- Select "control module". |
| -- Select "Data Bus On Board Diagnostic Interface". |
| -- Select "identify control module". |
| -- Select "Guided Functions ". |
| -- Select "switch on/switch off transport mode". |
| -- Follow the "Guided Functions " instructions. |