Throttle Valve Control Module -J338-, Removing And Installing: Installing

Install In Reverse Order Of Removal And Note The Following:

NOTE:

Replace seals, and O-ring after removing.

-- When installing the intake tube with the Throttle Valve Control Module -J338-, pay attention to the alignment pins.

-- Install the upper front coolant pipes. Refer to OVERVIEW - COOLANT PIPES .

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Install the engine cover. Refer to ENGINE COVER .

-- Fill with coolant. Refer to COOLANT, FILLING .

NOTE:

Used coolant cannot be used again.