Charge Air Pressure Sensor - G31-, Checking: Notes

General Description 

The Charge Air Pressure Sensor -G31- is located in the inlet to the intake manifold. The Engine Control Module -J623- uses the sensor signal to regulate the turbo boost. There is no substitute function in the event of signal failure. Charge air pressure regulation is shut off, leading to a significant reduction in engine output.

Special Tools And Workshop Equipment Required 

• Multimeter.
• Wiring Diagram.
• Scan Tool.

Test Requirements 

• Fuses OK.
• Battery voltage OK.
• Switch OFF all electrical and electronic accessories.
• Vehicles with Auto. Transmission, ensure Selector Lever position is in "P".
• Vehicles with Man. Transmission, ensure Shifter Lever position is in "N" with Parking Brake applied.
• Observe all safety precautions: SAFETY PRECAUTIONS .
• View clean working conditions: CLEAN WORKING CONDITIONS .
• For Hybrid vehicles refer to: HIGH VOLTAGE SYSTEM GENERAL WARNINGS .