Throttle Valve Control Module - GX3-, Checking: Notes

General Description 

Throttle valve operation occurs by an electric motor identified as EPC Throttle Drive -G186- located within the Throttle Valve Control Module -GX3-. It is controlled by the Engine Control Module - J623- with primary inputs from the Accelerator Pedal Module -GX2- as well as other peripheral inputs from Throttle Position Sensor -G69-.

The Throttle Valve Control Module -GX3 / J338- Contains The Following Components: 

• EPC Throttle Drive -G186-
• Throttle Position Sensor -G69-

The Throttle Valve Control Module -GX3 / J338- components cannot be serviced separately, and must be serviced as a unit.

Special Tools And Workshop Equipment Required 

• Multimeter.
• Wiring Diagram.
• Scan Tool.

Test Requirements 

• Fuses OK.
• Battery voltage OK.
• Switch OFF All electrical and electronic accessories.
• Vehicles with Auto. Transmission, ensure Selector Lever position is in "P".
• Vehicles with Manual Transmission, ensure Shifter Lever position is in "N" with Parking Brake applied.
• Observe all safety precautions: SAFETY PRECAUTIONS .
• View clean working conditions: CLEAN WORKING CONDITIONS .
• For Hybrid vehicles refer to: HIGH VOLTAGE SYSTEM GENERAL WARNINGS .