| 1 |
- PERFORM: Preliminary Check to verify the customers complaint. Refer to PRELIMINARY CHECK
-- Was complaint verified? |
-- YES:
-- NO:
- Gather more Information from customer about the complaint
|
| 2 |
- IGNITION: OFF
- DISCONNECT: Fuel Temperature Sensor -G81- electrical connector
- CHECK: Fuel Temperature Sensor -G81- terminals 1 to 2 for resistance.
- SPECIFIED VALUE: 2000 to 2400 Ω (@ approx. 20° C)
-- Was value obtained? |
-- YES:
-- NO:
|
| 3 |
- REMOVE: Engine Control Module - J623-. Refer to appropriate service Information.
- CHECK: Fuel Temperature Sensor -G81- electrical connector terminals 1 to the Engine Control Module - J623- electrical connector terminals T60 / 24.
- CHECK: Fuel Temperature Sensor -G81- electrical connector terminals 2 to the Engine Control Module - J623- electrical connector terminals T60 / 25.
- SPECIFIED VALUE: 0.5 Ω (± 0.3 Ω)
AU1 / BX5 ONLY:
- CHECK: Fuel Temperature Sensor -G81- electrical connector terminal 3 to the Engine Control Module - J623- electrical connector terminals T60 / 26.
- CHECK: Fuel Temperature Sensor -G81- electrical connector terminal 4 to the Engine Control Module - J623- electrical connector terminals T60 / 25.
- SPECIFIED VALUE: 0.5 Ω (± 0.3 Ω)
-- Was value obtained? |
-- YES:
-- NO:
|
| 4 |
- Final Procedure
- Perform a road test to verify repair.
- Do any DTC's return:
|
-- YES:
-- NO:
- Repair is complete, Generate readiness code. Refer to READINESS CODE
.
- Return vehicle to Customer
|