Tightening Specifications: Installing

INSTALL IN REVERSE ORDER OF REMOVAL. NOTE THE FOLLOWING:

-- CHECK IF THE RELEASE LEVER AND THE SLIDING SURFACE ON THE PIVOTING MOTOR ARE SUFFICIENTLY LUBRICATED WITH GREASE.

-- CONNECT THE REARVIEW CAMERA HOUSING AND THE PIVOTING MOTOR.

-- INSTALL THE BOLTS.

-- INSTALL THE REAR VIEW CAMERA HOUSING WITH THE PIVOTING MOTOR IN THE PIVOTING EMBLEM. REFER TO REARVIEW CAMERA -R189-, REMOVING AND INSTALLING .

TIGHTENING SPECIFICATIONS

• REFER TO OVERVIEW - REARVIEW CAMERA SYSTEM