Abs Control Module And Abs Hydraulic Unit, Gasoline Engine, Removing And Installing: Installing
Install In Reverse Order Of Removal. Note The Following:
NOTE:
Remove the plugs on the new ABS Hydraulic Unit -N55- only when installing the corresponding brake line.
Brake fluid will leak out if the plugs are removed too early from the ABS Hydraulic Unit -N55-. The system will then not have sufficient brake fluid and will not adequately bled.
Pay attention when installing the ABS Hydraulic Unit -N55- that the rubber bushings are not pushed out of the console.
-- Before assembling the holder for the ABS Hydraulic Unit -N55- in the bracket, spray the rubber bushings with Silicone Lubricant Spray: D 007 000 A2 .
-- Install the brake lines carefully with the :VAG1410/8 .