Transmission Oil Level, Checking And Filling: Adding

-- Measure the length of the pipe (dimension -a-) before installing the Adapter for Oil Filling VAS 6262 A onto the bottle, shorten the pipe if necessary. Refer to Modifying The Adapter For Oil Filling VAS 6262 A

Fig 1: Shortening Pipe On Adapter For Oil Filling VAS 6262 A

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-a- = 210 mm

NOTE:

Dimension -a- is measured starting from the green surface in the cap on the Adapter for Oil Filling VAS 6262 A.

-- Install the adapter from the Adapter for Oil Filling VAS 6262 A into the plug hole hand tight.

Fig 2: Identifying Oil Filling Adapter VAS 6262 A-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Shake the bottle before opening.

-- Fill with 1 liter of oil.

-- Connect the Adapter for Oil Filling VAS 6262 A to the quick release coupling on the adapter.

If oil flows out of the adapter hole:

The oil must not be topped off.

-- Let the excess oil drain.

-- As soon as the oil has run out (it begins to drip), remove the Adapter for Oil Filling VAS 6262 A and install the plug with a new seal.

If no oil flows out of the hole:

-- Add another liter of oil.

WARNING:

Too little or too much oil will impair the transmission.