Disassembly And Assembly: Transmission: Assembly: Notes

Special tools and workshop equipment required 

• Holding Plate VW 309
• Holding Fixture VW 313
• Transmission Support VW 353
• Thrust Tube VW 455
• Sleeve 3160
• Slide Hammer-Complete Set VW 771
• Kukko Puller 12-14.5 mm 21/1
• Kukko Separating Tool 5-60 mm 17/0
• Kukko Support 22/1
• Bracket 30-211 A
• Thrust Piece T10143
• Press Tool for Shaft Seal T10180
• Drift T10169 or T10362
• Thrust Piece T40008
• Torque Wrench (5-50 Nm) V.A.G 1331
• Inductive Heat Unit V.A.G 1416
• Drip Tray for VAS 6100 VAS 6208