Throttle Valve Control Module -J338-: Removing

-- Remove the engine cover, refer to ENGINE COVER .

-- Remove the air filter housing, refer to AIR FILTER HOUSING .

-- Remove the bolts -arrows-.

-- Loosen the clamp -2-, and remove the air guide pipe -1-.

Fig 1: Identifying Bolts, Clamp And Air Guide Pipe

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the hose clamps -2 and 3- and remove the coolant hoses.

Fig 2: Identifying Hose Clamps And Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows-.

-- Disconnect the coolant hoses -1- and -5- with Hose Clamps - Up To 25 mm 3094.

NOTE:

Place a cloth underneath to catch any escaping coolant.

-- Loosen the hose clamps -2, 3 and 4- and remove the coolant hoses.

-- Remove the bolt -3-.

Fig 3: Identifying Oil Dipstick Guide Tube Bolt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

Ignore items -1 and 2-.

Continuation for All Vehicles

-- Disconnect the connectors:

Fig 4: Identifying Throttle Valve Control Module With Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

2 -

for Intake Air Temperature Sensor -G42-

3 -

for the Throttle Valve Control Module - J338-

-- Loosen the hose clamp -4- and remove the air guide hose.

-- Remove the bolts -1- and the connection with the Throttle Valve Control Module - J338-.