Adding ATF
- Place the Shop Crane - Drip Tray VAS 6208 under the transmission.
-- Install the Oil Filler - Adapter 2 VAS 6262/2 into the ATF pan hand-tight with the engine running.
-- Shake before opening.
CAUTION:
The ATF filler tool must be clean and the ATF must not be mixed with any other ATF.
Allocation.
-- Attach the Oil Filler VAS 6262 A to the oil bottle. Be sure to read the instructions.
-- Fill 1 liter ATF.
-- Tighten Oil Filler VAS 6262 A to quick release coupling and check:
If ATF flows out of adapter hole:
ATF does not need to be topped off.
-- Allow ATF to drain until it drips.
-- Install the ATF inspection plug with a new seal. The ATF level test is now completed.
If ATF does not drip:
-- Add another liter.
WARNING:
Too little or too much ATF will impair the transmission. If 2 liters are missing, you should check the transmission more closely. There is probably a larger leak