Heater And A/C Unit, Disassembling And Assembling: Notes
-- Remove the heater and A/C unit. Refer to HEATER AND A/C UNIT, REMOVING AND INSTALLING .
- Upper Part of the Distribution Box
- The upper section is attached to the lower section with bolts -3- and clips -2-.
- Expansion Valve
- Removing and Installing. Refer to EXPANSION VALVE, REMOVING AND INSTALLING .
- Evaporator
- Removing and Installing. Refer to EVAPORATOR, REMOVING AND INSTALLING .
- Note seal Figure
- Blower Housing
- Fresh Air Blower -V2-
- Removing and Installing. Refer to FRESH AIR BLOWER -V2-, REMOVING AND INSTALLING .
- Condensation Water Drain HoseNOTE:
The condensation water drain hose with valve must not be kinked or pinched. Refer to CONDENSATION DRAIN HOSE, CHECKING .
- Front Passenger Side Footwell Vent
- Removing and installing. Refer to FRONT PASSENGER SIDE FOOTWELL VENT, REMOVING AND INSTALLING .
- Driver Side Footwell Vent
- Removing and installing. Refer to DRIVER SIDE FOOTWELL VENT, REMOVING AND INSTALLING .
- Heat Exchanger
- Removing and Installing. Refer to HEATER CORE, REMOVING AND INSTALLING .
- Auxiliary Heater Heating Element -Z35-
- Removing and Installing. Refer to AUXILIARY HEATER HEATING ELEMENT -Z35-, REMOVING AND INSTALLING .
- Depending on vehicle equipment
- Junction Box
- Lower Part of the Distribution Box