Rear Display And Control Head, Removing And Installing: Removing
NOTE:
If a new Rear A/C Display Control Head -E265- is installed, the replace control module function and a basic setting must be performed in the Guided Fault Finding or the Guided Functions.
-- Remove the rear vent. Refer to REAR VENT, REMOVING AND INSTALLING .
-- Pull the Rear A/C Display Control Head -E265- -1- on the indicated points -arrows- to the right or left with one hand and remove it from the center console.
-- Disconnect the connector from the Rear A/C Display Control Head -E265- -1-.