Right FOOTWELL Vent Temperature Sensor -G262-, Removing And Installing: Removing

-- Remove the lower instrument panel trim panel. Refer to Instrument Panel .

-- Disconnect the connector from the Right Footwell Vent Temperature Sensor -G262- -2-.

-- Turn the Right Footwell Vent Temperature Sensor -G262- -2- approximately 90° in direction of -arrow- and then remove it from the footwell vent -1-.

Fig 1: Turning Right Footwell Vent Temperature Sensor -2- ~90Degrees In -Direction Of Arrow- And Out Of Footwell Vent -1-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

The Right Footwell Vent Temperature Sensor -G262- is located on the rear side of the footwell vent. To improve the clarity of the illustration, it is shown from a different view.