Mount With Free-Running Hub On A/C Compressor, Removing And Installing: Installing

Install In Reverse Order Of Removal. Note The Following: 

-- First screw the free-running hub onto the A/C compressor input shaft by hand until it stops.

Fig 1: Identifying A/C Compressor Free-Running Hub, Installation

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the :3400  -1- into the A/C compressor free-running hub.

-- Insert the M10 socket -arrow- into the A/C compressor shaft.

-- Tighten the free-running hub using the :VAG1331/6  -2- and the :VAG1332  .

Tightening Specification Is 80 Nm.