Aligning Scissor Lift Table
WARNING: This page is about a different variant/trim than selected.
-- Install suitable adapters -A- at the left and right sides in a threaded hole on the subframe mount on the longitudinal member.
-- Install the : VAS6131/17-1 -B- in the adapter -A-.
-- Insert the bolts -C- center in the securing point on the subframe with the bolt heads facing upward.
-- Switch on the : VAS6131/17-1 and align the scissor lift table so that the laser beam strikes the bolt head on the left and right. Remove the dot laser and adapter again after aligning.