Information For Vehicles With Start/Stop System

If the vehicle has a start-stop system, perform the following termination conditions to deactivate the start-stop function:

• Use the Start/Stop button to switch off the Start/Stop System.
• The battery charge level does not make it possible to start the engine again (start voltage prediction).
• The defrost function is active.
• The windshield defogger is active.
• The selected temperature deviates more than 8 °C (46.4 °F) from the actual temperature inside the vehicle.
• The engine speed exceeds 1, 200 RPM.
• The Generator -C- is faulty, for example, the ribbed belt is torn.
• The coolant temperature is not in the specified range of 25 °C to 100 °C (77 to 212 °F).
• Increasing the blower speed by more than four increments.

Further Information:

• Refer to Self Study Program No. 426; Start/Stop System 2009 for more information.