April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Step 9 - Adjust Latch to Home Position

Close the liftgate.
With the scan tool run the "latch home position test".

NOTE:

This test will try to adjust the sector gear to the home position.

With the scan tool in inputs/outputs, read the "sector gear switch closed" state.

Does the scan tool display: FALSE?

No

Go to Test Step 10 - Check the Sector Switch Sense Circuit for a Short to the Logic Ground Circuit

Yes

Repair is complete. The latch was not in the home position.
Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .