Test Step 3 - Liftgate Open Driver Circuit Short to Liftgate Close Driver Circuit

Fig 1: Testing Liftgate Open Driver Circuit Short To Liftgate Close Driver Circuit

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Measure the resistance between the liftgate open driver circuit and the liftgate close driver circuit.

Is the resistance less than 1.5 ohms (should be approximately 4.3 ohms) ?

No

• Replace the power liftgate module. Refer to POWER LIFTGATE CONTROL MODULE .
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .

Yes

• Go to Test Step 6 Test Step 6 - Liftgate Open Driver Wire Short to the Liftgate Close Driver Wire