U0141 - Lost Communication With Totally Integrated Power Module: Notes
For a complete wiring diagram, refer to appropriate SYSTEM WIRING DIAGRAM.
- >>When Monitored:<< With the ignition ON. Battery voltage between 10 and 16 volts. Ignition off draw fuse installed. Totally integrated power module is configured correctly.
- >>Set Condition:<< Bus messages not received from the TIPM for approximately 2 to 5 seconds.
| Possible Causes |
|---|
| DIAGNOSTIC CAN C BUS CIRCUITS OPEN OR SHORTED |
| DTCs RELATED TO BATTERY VOLTAGE, IGNITION, OR VIN MESSAGES |
| TIPM NOT CONFIGURED CORRECTLY |
| TOTALLY INTEGRATED POWER MODULE POWER AND GROUND |
| TOTALLY INTEGRATED POWER MODULE |
| MODULE THAT SET THIS DTC |