Test Step 5 - Liftgate Ajar Switch Sense Circuit Open

Fig 1: Liftgate Ajar Switch Sense Circuit Open

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Disconnect the power liftgate module C2 harness connector.
• Measure the resistance of the liftgate ajar switch sense circuit between the power liftgate C2 harness connector and the power liftgate latch connector.
• Wiggle the harness while observing the ohmmeter.

Is the resistance less than 2.0 ohms?

Yes

• Replace the power liftgate latch. Refer to LIFTGATE LATCH .
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .

No

• Repair the liftgate ajar switch sense circuit for an open.
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .