Test Step 3 - Check Power Liftgate Connectors For Excessive Circuit Resistance

• Disconnect all power liftgate module harness connectors.
• Disconnect the power liftgate drive unit harness connector.
• Check all connectors for damage or corroded/pushed out terminals.

Do any connectors or terminals need repairing?

Yes

• Repair as necessary.
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .

No

• Replace the power liftgate drive unit. Refer to POWER LIFTGATE DRIVE UNIT .
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .