Test Step 2 - Binding Liftgate

• Examine the liftgate for proper alignment, worn or binding hinges, weak liftgate prop assembly, loose/hard weatherstrip, and track assembly for wear or anything that would cause an obstruction to proper operation.
• If necessary manually operate the power liftgate on a known good vehicle and notice the effort needed to open and close for comparison.
• Especially notice the effort needed to unlatch and close the liftgate.

Were there any mechanical problems found?

Yes

• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .

No

• Go to Test Step 3 Test Step 3 - Check the Liftgate Latch Cinch Driver Circuit for an Open Or High Resistance