Test Step 5 - Latch Secondary Position Sense Circuit Open

Fig 1: Latch Secondary Position Sense Circuit Open

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Measure the resistance of the latch secondary position sense circuit between the power liftgate module C2 connector and the power liftgate latch connector.

Is the resistance less than 2.0 ohms?

Yes

• Go to Test Step 6 Test Step 6 - Check the Logic Ground Circuit for an Open .

No

• Repair the latch secondary position sense wire for an open.
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .