Metal Cover

Fig 1: Identifying Transmission Housing Without Sealing Cap Circlip

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the cap/input shaft circlip -A-.

-- Pierce the rubber piece in the center of the cover -C- using a Screwdriver.

Fig 2: Identifying Support, Internal Puller & Cap

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the cover from the transmission housing.

A -

Counter Support, for example 22/1

B -

Internal Puller 8 to 12 mm, for example 21/01

NOTE:

Can push through the center of the cover for removing the cover -1-

Fig 3: Prying The Cover Out

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Pry the cover -2- carefully off the transmission housing.