Update Programming ECM To Correct Engine Load Calculations (V011513)

WARNING: This page is about the Passat S, 1.8L Eng VIN S, Automatic Trans, which is a different variant/trim than selected.

Publication date: 2016-05-09
Reference number: V011513
Supersedes refnos: 2037620, GROUP 01, NO. 14-16, GROUP 01, NO. 15-13, GROUP 01, NO. 16-07

UPDATE PROGRAMMING ECM TO CORRECT ENGINE LOAD CALCULATIONS

TECHNICAL SERVICE BULLETIN

Reference Number(s): GROUP 01, NO. 16-07 (2037620), Date of Issue: May 9, 2016

VOLKSWAGEN:	2014 Jetta; 2013-2014 Jetta; 2013-2014 Beetle, Beetle Convertible; 2014 Passat
GROUP:	01 - On-Board Diagnostic

Superceded Bulletin(s): GROUP 01, NO. 15-13, Date of Issue: June 3, 2015

APPLICABLE MODELS AND YEARS

Model(s)	Year	Eng. Code	Trans. Code	VIN Range From	VIN Range To
Jetta	2014	1.8L (CPKA, CPRA)	All	All	All
Jetta	2013-2014	2.0L (CPPA, CPLA)	All	All	All
Beetle, Beetle Convertible	2013-2014	2.0L (CPPA, CPLA)	All	All	All
Passat	2014	1.8L (CPKA, CPRA)	All	All	All

CONDITION

01 16 07 May 9, 2016 2037620 Supersedes Technical Bulletin V011513 dated June 03, 2015 to update part number and software levels as well as Beetle/Beetle Convertible 1.8L applicability.

Update Programming ECM to Correct Engine Load Calculations

Update Programming, for rough idle and/or stumbling. ECM may contain various fault codes.

TECHNICAL BACKGROUND

Current ECM programing does not efficiently control engine valve timing causing stumbling and rough idle.

PRODUCTION SOLUTION

N/A.

SERVICE

Update-Programming Procedure

Tip:

To Update-Programming using SVM, review and follow instructions in Technical Bulletin Instance 2014603 "Software Version Management". The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim.

NOTE: Prior to launching the ODIS service diagnostic applications and starting control module update process, confirm tester screen saver and power settings in accordance with Special Tools and Equipment - Service Information Circular # VVT-12-02. Failure to do so may result in the tester entering power save mode during data transfer, and subsequent control module failure.

When using a VAS 6150/X or 6160/X tester in conjunction with a VAS 5054A wireless transmitter head for a flash procedure, please connect a USB cable between the transmitter head and the tester. Failure to do so may lead to errors during the flash procedure.

VAS tools must only be used with their power adapters plugged in. Under no circumstances should they be used on battery power alone during the programming procedure.

Critical Warning: The Midtronics Battery Charger must be connected to the vehicle battery for the duration of the programming, to ensure the battery state of charge remains above 12.5 volts during the update process. If the battery drops below 12.5 volts, the programming could fail which may result in damage to the control module. Control modules damaged by inadequate voltage will not be covered under the warranty policy. The technician should verify the vehicle voltage prior to starting the update process, and should monitor the voltage for the duration of the update.

WARNING: Radiator Fan(s) may cycle ON high speed during the Update Process! There is a risk that personal injury may result if contact is made with spinning fan blades.
Keep hands and all objects away from Radiator Fan(s) during Update Process!

Update the Engine Control Module using the SVM Unit code as listed in the table below:

SOFTWARE VERSION MANAGEMENT - BEETLE

Model	Engine	Old Software Part No.	Old Software Version	New Software Part #	New Software Version (or higher)	SVM Unit Code
Beetle, Beetle Convertible	CPLA	06K 906 070 AA	4879 5136 5782 6061 6115 6271 6900 7648 8051	06K 906 070 AA	8098	3AB9
Beetle, Beetle Convertible	CPPA	06K 906 070 AC	4887 5135 5784 6062 6116 6273 6902 7647 8050	06K 906 070 AC	8097	3C07
Beetle, Beetle Convertible	CPLA	06K 906 070 A	4053 4236 4370 4878 5132 5222 5528 5781 8051	06K 906 070 AA	8098	3AB9
Beetle, Beetle Convertible	CPPA	06K 906 070 C	4055 4238 4372 4889 5131 5530 5790 8050	06K 906 070 AC	8097	3C07
Beetle, Beetle Convertible	CPLA	06K 906 070 N	4059 4980 5798 6112 6279 7645 8048	06K 906 070 N	8095	3AB9
Beetle, Beetle Convertible	CPLA	06K 906 070 P	4060 4240 4893 5089 5799 6113 6280 6897 7644 8047 6281 7646 8049	06K 906 070 P	8094	3AB9
Beetle, Beetle Convertible	CPLA	06K 906 070 R	4061 5137 5800	06K 906 070 R	8096	3AB9

SOFTWARE VERSION MANAGEMENT - JETTA

Model	Engine	Old Software Part No.	Old Software Version	New Software Part No.	New Software Version (or higher)	SVM Unit Code
Jetta	CPLA	06K 906 070 T	4894 5139 5801 6059 6110 6282 6899 7643 8046	06K 906 070 T	8093	3AB9
Jetta	CPPA	06K 906 070 AB	4886 5138 5783 6060 6111 6272 6901 7642 8045	06K 906 070 AB	8092	3C07
Jetta	CPLA	06K 906 070	4052 4228 4241 4356 4475 4877 5134 5527 5780 8046	06K 906 070 T	8093	3AB9
Jetta	CPPA	06K 906 070 B	4054 4237 4371 4493 4888 5133 5529 5789 8045	06K 906 070 AB	8092	3C07
Jetta	CPLA	06K 906 070 K	4056 4890 5142 5795 5804 6107 6276 7641 8044	06K 906 070 K	8091	3AB9
Jetta	CPLA	06K 906 070 L	4057 4891 5141 5796 5805 6108 6277 7640 8043	06K 906 070 L	8090	3AB9
Jetta	CPLA	06K 906 070 M	4058 4239 4373 4892 5140 5797 5806 6109 6278 7639 8042	06K 906 070 M	8089	3AB9
Jetta	CPKA	06K 906 070 D	4906 5144 5387 5510 5791 6055 6117 6221 6274 6864 7650	06K 906 070 D	8053	3AB9
Jetta	CPRA	06K 906 070 F	4907 5143 5388 5511 5792 6056 6118 6220 6275 6865 7649	06K 906 070 F	8052	3C07

SOFTWARE VERSION MANAGEMENT - PASSAT

Model	Engine	Old Software Part No.	Old Software Version	New Software Part No.	New Software Version (or higher)	SVM Unit Code
Passat	CPKA	06K 906 070 H	5573 5793 6057 6119 6866 7652	06K 906 070 H	8055	3AB9
Passat	CPRA	06K 906 070 J	5574 6058 5794 6120 6867 7651	06K 906 070 J	8054	3C07

The procedure can be found in GFF under Functions/Component Selection, Software Version Management, Adapting Software.

Tip:

The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim or action is carried out that is not explicitly stated in the Technical Bulletin.

Ensure attached ECM/TCM Tuning Form has been completed and signed by customer as required in SVM Technical Bulletin Instance 2014603 .

WARRANTY

WARRANTY INFORMATION

To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and Procedures Manual ⁽¹⁾

Model(s)

Year(s)

Eng. Code(s)

Trans. Code(s)

VIN Range From

VIN Range To

Jetta

2014

1.8L (CPKA, CPRA)

All

Jetta

2013-2014

2.0L (CPPA, CPLA)

All

Beetle, Beetle Convertible

2013-2014

1.8L (CPKA, CPRA)

All

Beetle, Beetle Convertible

2013-2014

2.0L (CPPA, CPLA)

All

Passat

2014

1.8L (CPKA, CPRA)

All

SAGA Coding

Claim Type:

Use applicable Claim Type ⁽¹⁾

Service Number:

Damage Code

HST

Damage Location (Depends on Service No.)

2470

0039

Use applicable when indicated in Elsa (L/R)

Parts Manufacturer

Passat

WWO ⁽²⁾

Jetta, Beetle, Beetle Convertible

3ME ⁽²⁾

Labor Operation ⁽³⁾: Charge Battery

27068950 = 10 TU

Labor Operation ⁽³⁾: Update ECM Programming

Included in GFF Time expenditure below

Causal Part: Select Labor Operation

01500000

Diagnostic Time ⁽⁴⁾

GFF Time expenditure

01500000 = 50 TU max.

YES

Road Test

01210002 = 10 TU
01210004 = 10 TU

YES

Technical Diagnosis

01320000 = 00 TU max.

Claim Comment: Input "As per Technical Bulletin 2037620" in comment section of Warranty Claim.

⁽¹⁾	Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only

⁽²⁾	Code per warranty vendor code policy.

⁽³⁾	Labor Time Units (TUs) are subject to change with ELSA updates.

⁽⁴⁾	Documentation required per Warranty Policies and Procedures Manual.

REQUIRED PARTS AND TOOLS

No Special Parts required.

TOOL INFORMATION

Tool Description	Tool No:
Midtronics Battery Tester/Charger	InCharge 940 (INC-940) or GRX3000VAS
VAS Diagnostic Tool	VAS 6150/X & VAS 6160/X with: ODIS Service with current online updates

ADDITIONAL INFORMATION

All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information.

ATTACHMENT