LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2014 >> Passat TDI SE, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Communication) >> 91 Communication >> Removal And Installation >> Compass Magnetic Field Sensor -G197- /Vehicle Location Recognition Control Module -J603- >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Compass Magnetic Field Sensor -G197- /Vehicle Location Recognition Control Module -J603-: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 Volkswagen Tiguan Limited, 2017 Volkswagen Tiguan, 2016 Volkswagen Tiguan, 2015 Volkswagen Tiguan, and 2014 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electric consumers and remove the key.

-- Lower the rear headliner. Refer to Removal and Installation .

-- Remove the Compass Magnetic Field Sensor -G197- -1- from the roof with a small screwdriver.

Fig 1: Aligning The Compass Magnetic Field Sensor
GWWM91-10004Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release and disconnect the connector -2- and remove the Compass Magnetic Field Sensor -G197- -1-.