LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2014 >> Passat TDI SE, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> 2.0L - Generic Scan Tool - Engine Code: CKRA >> St Generic Scan Tool >> Diagnosis And Testing >> Readiness Code >> Readiness Codes and Monitoring Completed
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Readiness Codes and Monitoring Completed

  1. If any engine monitor fails the drive cycle test. Repeat the drive cycle test until all engine monitors have successfully run through and passed.
  2. If the drive cycle operation fails again.
  3. Check the DTC memory for stored DTCs.
  4. Repair the vehicle if necessary.
  5. Repeat the drive cycle operation until all engine monitors have successfully run through and passed.
  6. Remove the scan tool and switch the ignition off.
scientia non olet · About LEMON Manuals